Xinyetong - Leading and reliable RFID Tag, RFID Wristband, RFID/NFC Card supplier.
Protect valuable jewelry and enhance product identification with our NTAG 213TT Anti-Counterfeit and Tamper-Evident Jewelry Tag, a smart NFC labeling solution designed for jewelry security, product authentication workflows, and tamper-status monitoring.
Powered by the NXP NTAG213TT NFC chip, this tag combines contactless identification with a dedicated electronic tamper-detection feature. When the tag's tamper-detection circuit is properly integrated into the label and installation design, it can identify an opened detection loop and retain a record of the event.
The NTAG213TT chip also supports an ECC-based originality signature, which can be used to help verify chip originality within a properly designed authentication system.
The pictured product features a green rectangular label surface, a white backing structure, and a slim format marked approximately 29mm × 71mm. Its elongated design can be evaluated for jewelry labels, retail packaging, product seals, and other security-conscious applications.
By combining NFC technology, tamper-event detection, and connected product information, this label offers jewelry brands and retailers a practical starting point for intelligent product identification and protection.
Product Description
The NTAG 213TT Anti-Counterfeit and Tamper-Evident Jewelry Tag is an NFC-enabled security label designed for applications where product identification and evidence of unauthorized opening are important.
Traditional printed jewelry labels can display product information, but they do not provide electronic tamper-event information. With a suitable NTAG213TT-based construction, a jewelry label can combine an NFC identifier, digital content access, and a tamper-detection circuit.
The NTAG213TT chip operates at 13.56MHz and supports NFC Forum Type 2 Tag functionality. A compatible NFC device can read configured tag data and interact with supported product information services.
A distinguishing feature of this chip is its Tag Tamper function. The chip monitors a dedicated detection loop during initialization. If the loop is detected as open, the chip can permanently record the event and make relevant status information available through supported commands or configured NDEF data.
This functionality can help indicate whether a properly installed security label or seal has been opened.
The chip also offers an ECC-based originality signature, which supports verification of the NFC chip's originality. When combined with item registration, secure data management, and controlled label application, this capability can contribute to a broader jewelry authentication solution.
The product images show a green rectangular front surface and a white reverse-side structure with visible circuit patterns. Several labels are supplied together on a backing sheet, providing a convenient presentation format for handling and application.
For jewelry manufacturers, retailers, and luxury packaging suppliers, this NFC security label can be developed for product identification, packaging integrity checks, after-sales information, and connected customer experiences.
The actual tamper response, attachment performance, and NFC reading characteristics must be confirmed using samples of the final label design.
Key Features
Uses the NXP NTAG213TT chip, operating at 13.56MHz and supporting NFC Forum Type 2 Tag functionality for compatible contactless applications.
The dedicated tamper function can identify an opened detection loop when the label is correctly constructed and installed for the intended security application.
The chip supports recording a detected open-loop event, enabling a connected system to distinguish between an intact and previously opened detection circuit.
Supports an ECC-based originality signature that can help verify the chip's originality. Product-level authentication requires suitable item association and system controls.
Provides 144 bytes of user read/write memory for supported NFC content and application data.
Each NTAG213TT chip includes a manufacturer-programmed 7-byte identifier that can be used as part of an item registration or identification process.
Compatible NFC-enabled smartphones and readers can access supported tag content, making it possible to connect jewelry products with digital information and customer services.
Printing, encoding, label layout, adhesive, and tamper-circuit integration can be discussed for different jewelry and luxury packaging applications.
COMPANY STRENGTH
|
|
|
|
|||||||||
|
|
Working Temperature | -25–65℃ | |||||||||
|
|
|
|
|||||||||
|
|
|
|
|||||||||
|
|
|
|
|||||||||
|
|
|
|
Applications
Contact Us
Tel: +(86) 755 2697 9016
Mobile: +(86) 138 2654 2918
E-mail: marketing@xinyetongcard.com
URL: www.smart-rfidtag.com
Add: Room 1601, Jingyuan Building, No. 28, Bulong Road, Buji Street, Longgang District, Shenzhen.